Motorola AP-51 Series Product Reference Manual page 478

8-136 AP-51xx Access Point Product Reference Guide
AP51xx>admin(network.firewall)> set
Description:
Defines the access point firewall parameters.
Syntax:
set mode
nat-timeout
syn
src
win
ftp
ip
seq
mime
len
hdr
Example:
admin(network.firewall)>set mode enable
admin(network.firewall)>set ftp enable
admin(network.firewall)>set ip enable
admin(network.firewall)>set seq enable
admin(network.firewall)>set src enable
admin(network.firewall)>set syn enable
admin(network.firewall)>set win enable
admin(network.firewall)>show
Firewall Status
Override LAN to WAN Access
Configurable Firewall Filters
ftp bounce attack filter
syn flood attack filter
unaligned ip timestamp filter
source routing attack filter
winnuke attack filter
seq num prediction attack filter
mime flood attack filter
max mime header length
max mime headers
<mode> Enables or disables the firewall.
<interval> Defines the NAT timeout value.
<mode> Enables or disables SYN flood attack check.
<mode> Enables or disables source routing check.
<mode> Enables or disables Winnuke attack check.
<mode> Enables or disables FTP bounce attack check.
<mode> Enables or disables IP unaligned timestamp check.
<mode> Enables or disables sequence number prediction check.
filter Enables or disables MIME flood attack check.
<length> Sets the max header length in bytes as specified by <length>
(with value in range
<count> Sets the max number of headers as specified in <count>
(with value in range
256 - 34463).
12 - 34463).
: enable
: disable
: enable
: enable
: enable
: enable
: enable
: enable
: enable
: 8192
: 16