Configuring Firewall Settings - Motorola AP-51 Series Product Reference Manual

NOTE PMK key caching is enabled internally by default when 802.1x EAP
9. Click the Apply
10. Click the Cancel
and return to the

6.10 Configuring Firewall Settings

The access point's firewall is a set of related programs located in the gateway on the WAN side of
the access point. The firewall uses a collection of filters to screen information packets for known
types of system attacks. Some of the access point's filters are continuously enabled, others are
configurable.
Use the access point's
each filter for maximum security. Disable a filter if the corresponding attack does not seem a threat
in order to reduce processor overhead. Use the WLAN Security screens (WEP, Kerberos etc.) as
required for setting user authentication and data encryption parameters.
To configure the access point firewall settings:
1. Select Network Configuration
authentication is enabled.
button to save any changes made within this New Security Policy screen.
button to undo any changes made within the WPA2/CCMP Settings field
WLAN screen. This reverts all settings to the last saved configuration.
Firewall screen to enable or disable the configurable firewall filters. Enable
-> Firewall from the access point menu tree.
Configuring Access Point Security 6-27