Motorola AP-51 Series Product Reference Manual page 149

Hide thumbs Also See for AP-51 Series:

Table of Contents

System Configuration

3. Configure the

DHCP Options

checkboxes to enable/disable automatic firmware and/or

configuration file updates.

DHCP options are used for out-of-the-box rapid deployment for Motorola wireless products.

The following are the two options available on the access point:

• Enable Automatic Firmware Update

• Enable Automatic Configuration Update

Both DHCP options are enabled by default.

These options can be used to update newer firmware and configuration files on the access

point. For more information on how to configure a DHCP or BootP Server for the automatic

upgrade process, see

Usage Scenarios on page

The update is conducted over the LAN or WAN port depending on which server responds

first to the access point's request for an automatic update.