Motorola AP-51 Series Product Reference Manual page 246

6-20 AP-51xx Access Point Product Reference Guide
5. Configure the
the WEP keys used with the KeyGuard algorithm. These keys must be the same between the
access point and its MU to encrypt packets between the two devices
Pass Key
Keys #1-4
Default (hexadecimal) keys for KeyGuard include:
Key 1
Key 2
Key 3
Key 4
6. Select the
field) to enable WEP128 clients to associate with an access point's KeyGuard supported
WLAN. The WEP128 clients must use the same keys as the KeyGuard clients to interoperate
within the access point's KeyGuard supported WLAN.
7. Click the
New Security Policy screen.
8. Click the
return to the
KeyGuard Settings
Specify a 4 to 32 character pass key and click the
The pass key can be any alphanumeric string. The
other proprietary routers, and Motorola MUs use the algorithm to
convert an ASCII string to the same hexadecimal number. MUs
without Motorola adapters need to use WEP keys manually
configured as hexadecimal numbers.
Use the Key #1-4
either a hexadecimal or ASCII depending on which option is
selected from the drop-down menu. The keys are 26 hexadecimal
characters in length or 13 ASCII characters. Select one of these
keys for activation by clicking its radio button.
101112131415161718191A1B1C
202122232425262728292A2B2C
303132333435363738393A3B3C
404142434445464748494A4B4C
Allow WEP128 Clients
Apply button to save any changes made within the KeyGuard Setting field of the
Cancel button to undo any changes made within the KeyGuard Setting field and
WLAN screen. This reverts all settings to the last saved configuration.
field as required to define the Pass Key used to generate
areas to specify key numbers. The key can be
checkbox (from within the
Generate button.
access point
,
KeyGuard Mixed Mode