10-8
AP-51xx Access Point Product Reference Guide
before MUs can pass traffic. This typically takes about 90 to 180 seconds depending on the size of
the mesh topology.
NOTE When mesh is used with AAPs, the "ap-timeout" value needs to be set to
For an overview of mesh networking and how to configure an AP-5131 or AP-5181 to support mesh,
see
Configuring Mesh Networking on page
a higher value (for example, 180 seconds) so Mesh AAPs remain adopted
to the switch during the period when the configuration is applied and
mesh links are re-established.
9-1.