Motorola AP-51 Series Product Reference Manual page 652

10-14 AP-51xx Access Point Product Reference Guide
2. Select the
Enabling auto discovery will allow the AAP to be detected by a switch once its connectivity
medium has been configured (by completing steps 3-6)
3. Enter up to 12
connection.
The AAP will begin establishing a connection with the first addresses in the list. If
unsuccessful, the AP will continue down the list (in order) until a connection is established.
4. If a numerical IP address is unknown, but you know a switch's fully qualified domain name
(FQDN), enter the name as the
5. Select the
switch using a secure VPN tunnel.
6. If using IPSec as the tunnel resource, enter the IPSec
Auto Discovery Enable
Switch IP Addresses
Switch FQDN
Enable AP-Switch Tunnel
checkbox.
constituting the target switches available for AAP
value.
option to allow AAP configuration data to reach a
Passkey to ensure IPSec connectivity.