Motorola AP-51 Series Product Reference Manual page 372

8-30 AP-51xx Access Point Product Reference Guide
AP51xx>admin(network.lan.dhcp)> show
Description:
Shows DHCP parameter settings.
Syntax:
show Displays DHCP parameter settings for the access point. These parameters are defined with the set
command.
Example:
admin(network.lan.dhcp)>show
**LAN1 DHCP Information**
DHCP Address Assignment Range:
Starting IP Address
Ending IP Address
Lease Time
**LAN2 DHCP Information**
DHCP Address Assignment Range:
Starting IP Address
Ending IP Address
Lease Time
For information on configuring DHCP using the applet (GUI), see
: 192.168.0.100
: 192.168.0.254
: 86400
: 192.168.0.100
: 192.168.0.254
: 86400
Configuring the LAN Interface on page 5-1.