Motorola AP-51 Series Product Reference Manual page 329

4. Refer to the RF Status
information for the target access point 802.11a or 802.11b/g radio.
Avg MU Signal
Avg MU Noise
Avg MU SNR
5. Refer to the Errors
target access point 802.11a or 802.11 b/g radio either gave up on could not decrypt.
Avg Num. of Retries
Dropped Packets
% of Undecryptable
Pkts
6. Click the Clear Radio Stats
order to begin new data collections.
field to view the following MU signal, noise and performance
Displays the average RF signal strength in dBm for all MUs
associated with the radio. The number in black represents the
average signal for the last 30 seconds and the number in blue
represents the average signal for the last hour. If the signal is low,
consider mapping the MU to a different WLAN, if a better
functional grouping of MUs can be determined.
Displays the average RF noise for all MUs associated with the
access point radio. The number in black represents MU noise for
the last 30 seconds and the number in blue represents MU noise
for the last hour. If MU noise is excessive, consider moving the MU
closer to the access point, or in area with less conflicting network
traffic.
Displays the average Signal to Noise Ratio (SNR) for all MUs
associated with the access point radio. The Signal to Noise Ratio
is an indication of overall RF performance on your wireless
network.
field to reference retry information as well as data transmissions the
Displays the average number of retries for all MUs associated with
the access point 802.11a or 802.11b/g radio. The number in black
represents retries for the last 30 seconds and the number in blue
represents retries for the last hour.
Displays the percentage of packets the AP gave up on for all MUs
associated with the access point 802.11a or 802.11b/g radio. The
number in black represents this statistic for the last 30 seconds and
the number in blue represents this statistic for the last hour.
Displays the percentage of undecryptable packets for all MUs
associated with the 802.11a or 802.11b/g radio. The number in
black represents packets for the last 30 seconds and the number in
blue represents packets for the last hour.
button to reset each of the data collection counters to zero in
Monitoring Statistics 7-23