Locking your Handheld Computer
You can lock your handheld computer so that you need to
enter your password to operate it.
If you lock your handheld computer, you must enter the
Tip:
exact password to re-activate your unit. If you forget the
password, you need to perform a hard reset to resume using
your handheld computer. Performing a hard reset deletes all
the records in your unit; however, you can restore all
synchronized data at the next HotSync operation. Refer to
Performing a Hard Reset in Chapter 7 for more information.
To lock your handheld computer with a password:
Perform a HotSync operation to synchronize the data between
1.
your handheld computer and your computer.
Assign a Password. Refer to Assigning a Password on page 5-16.
2.
Tap Lock & Turn Off.
3.
HandEra 330 User Guide
Figure 5-18. Lock & Turn Off
5-19