Troubleshooting Communication Problems
Checking your Connections
Check the contact points on your handheld and on the HotSync
1.
cradle and make sure they are clean and free from obstruction.
Make sure that your handheld is seated firmly in the HotSync
2.
cradle.
Check the HotSync connection on the back of your computer to
3.
make sure it is properly attached.
Perform a HotSync operation. If you are still having problems,
4.
refer to Checking Your Handheld Settings.
Checking your Settings
Turn on your unit and tap the Applications icon.
1.
Tap the HotSync icon.
2.
Tap Local above the HotSync icon.
3.
Select Direct Serial from the pick list below the HotSync icon.
4.
HandEra 330 User Guide
Figure 7-1. HotSync Settings
7-3