Caution:
correctly installed, the battery door clips smoothly into place.
When changing the batteries, replace them immediately. The
built-in backup power maintains memory of your data for up
to one minute.
Setting up your Handheld Computer
Make sure the batteries are installed correctly. Refer to
1.
Figure 1-3.
Press the power button to turn on your unit.
2.
Follow the instructions on the screen to set up your HandEra.
3.
Note:
Frequently Asked Questions and the Palm Helpnote files
located in the folder where you installed the Palm Desktop
Software.
After you enter the time and date, tap Next to complete the Basic
4.
Skills tutorial.
To access the Basic Skills tutorial later, tap the
Tip:
Welcome icon in the Applications launcher.
Connecting the HotSync Cradle
The HotSync cradle attaches to your desktop computer
using a standard serial port connector. The associated
COM port may not be shared with any other devices.
You may require an adapter to convert the 9-pin
Note:
connector to a 25-pin.
To connect the HotSync cradle to the desktop computer:
Shut down and turn off your desktop computer.
1.
Plug the HotSync cable into an unused serial (COM) port on
2.
your computer. Refer to Figure 1-4.
HandEra 330 User Guide
Do not force the battery door. When the batteries are
If your unit does not turn on, refer to Chapter 7,
1-5