Resetting Your Handheld Computer; Performing A Soft Reset; Performing A Warm Reset - HandEra 330 User Manual

Resetting Your Handheld Computer

If your handheld does not respond to buttons or tapping the screen,
you need to perform a reset to enable your unit to run again.

Performing a Soft Reset

A soft reset tells your unit to stop what it is doing and start over
again while retaining all records and entries stored in your unit.
Using the plastic stylus tip, gently press the reset button inside the
hole on the back panel of your unit.
Reset Button
Figure 7-2. Reset Button

Performing a Warm Reset

A warm reset restarts your unit, disabling any third-party
applications. This is used when you suspect an application that you
recently installed is causing the problem. To perform a warm reset,
press and hold the Up button. Use the stylus tip to press the reset
button. When the Palm logo screen appears, release the Up button.
Open the Memory application and delete the offending application,
and then perform a soft reset.
HandEra 330 User Guide 7-15