Alarm Led - HandEra 330 User Manual

Alarm LED

Certain applications, such as Date Book, can be set up to sound an
alarm prior to upcoming events. Your HandEra handheld can also be
setup to flash the LED in addition to, or instead of, sounding an
alarm. To enable this feature, perform the following steps:
Tap the Alarm LED pick list.
1.
Change the Alarm LED setting to On.
2.
If you wish to disable the Alarm Sound, change its setting to Off.
: Once the LED begins flashing to signal an alarm, it
Note
will continue flashing until you tap OK on the reminder
message.
A-22
Figure A-21. Alarm LED
HandEra 330 User Guide