Entering Data With Graffiti Writing - HandEra 330 User Manual

Entering Data with Graffiti Writing

Graffiti characters are similar to uppercase letters that are formed
with a single-stroke. Your writing turns into text wherever the
blinking cursor appears on the screen. Graffiti writing is easy, fun,
accurate, and fast (up to 30 words per minute).
Open an application. Tap a record or tap New.
1.
Tap the line where you want the text to appear.
2.
Write Graffiti characters in the Graffiti writing area.
3.
Graffiti Tips
♦ Write big and press firmly. Draw strokes that nearly fill the
Graffiti writing area to improve accuracy.
♦ To delete characters, set the insertion point to the right of the
character you want to delete and make the backspace stroke in
the Graffiti writing area.
♦ Write at natural speed. Writing too slowly can generate errors.
♦ Do not write on a slant. Vertical strokes should be parallel to
the sides of the Graffiti writing area.
♦ Drag the stylus from the Graffiti writing area into the
Application area to display the Graffiti help displayed in
Figure 2-6.
2-8
Write Letters
Figure 2-5. Graffiti Writing Area
Write Numbers
HandEra 330 User Guide