Digitizer Preferences
The Digitizer Preferences screen opens the digitizer calibration
screen. This is the same screen that appears when you start your
HandEra computer for the first time. You can re-calibrate your screen
after a hard reset, or if your digitizer drifts.
Tap the Applications icon.
1.
Tap the Prefs icon.
2.
Tap the pick list in the upper-right corner. Refer to Figure A-1.
3.
Tap Digitizer.
4.
Tap the stylus as indicated on the screen.
5.
A-16
Figure A-15. Digitizer
HandEra 330 User Guide