Set-Up; Operating The Osd Menu; Osd Menu Structure - Wirepath Surveillance WPS-700-BUL-A-GR Installation Manual

WPS-700-BUL-A-GR Installation Manual

SET-UP

Operating the OSD Menu

• To view the OSD, the camera must
be connected to a display monitor.
• The button found on the
pigtail provides five
separate actions:
UP, DOWN, EXIT,
ENTER and MENU.
• Press the button to enter
into the OSD MENU page.
• Press UP, DOWN, EXIT (Left)
or ENTER (Right) to select
items on the menu and
begin configuration.

OSD Menu Structure

Settings have been preconfigured for optimal performance in most
applications. If adjusting the settings produces a poor picture,
factory reset the camera to restore the original settings (see p.21)
Bold indicates factory preset
OFF, ON
CAM NAME
DC IRIS
LENS
MANUAL
EXPOSURE AGC
SHUTTER
SENSE-UP
INITIAL SET
PREVIOUS
8
0-100 (50)
BRIGHTNESS
OFF, LOW, MIDDLE, HIGH
AUTO, OFF, A. FLK, 1/160, 1/250, 1/500, 1/700, 1/1000,
1/1600/ 1/2500, 1/5000, 1/7000, 1/10000, 1/30000,
1/50000, 1/90000, X2, X3, X4, X5, X6, X8, X10, X12, X14,
X16, X24, X32, X64, X128, X256, X512
Auto, X2~X512 (Auto X8)
OSD Menu
Button