Table of Contents
Advertisement
Projects
Project overview & project protection
A project stores data and settings necessary for music playback.
The "PROTECT" function allows you to prevent the alteration of a completed project.
All elements of a piece of music, including au-
dio files, information about track assignments,
and mixer, effect, metronome and tuner set-
tings are stored in a project as one unit.
A maximum of 1000 projects can be stored on
a single card. Create a new project for each
new piece of music.
DATA saved in a project:
• Audio data for every track including the
MASTER track
• Mixer settings
• Patch numbers and settings made for insert
and send-return effects
• Contents of play lists
• Other necessary files
• Sampler loop and sequence data settings
• Rhythm pattern, volume and stereo
placement settings
The names of the folders in the PROJECT
folder correspond to the projects with the same
names.
89
Protecting a project
PROJECT>PROTECT
1
Press
2
Select PROTECT.
3
Select ON.
NOTE
•
• When a project is protected, you cannot record in
it or edit it, and any changes will not be saved to
the SD card. Set "PROTECT" to "Off" if you want
to record in it or edit it again.
• Projects that are not protected will be automati-
cally saved to the SD card when you turn the
POWER switch OFF or when you open another
project.
• We recommend setting "PROTECT" to "On" once
you complete a piece of music to avoid saving
unwanted changes mistakenly later.
HINT
This icon appears when
a project is protected.
Change menu
Change
Advertisement
Table of Contents
