Recording To The Master Track - Zoom R24 Operation Manual

Recorder/interface/controller/sampler
Hide thumbs Also See for R24:
Table of Contents

Advertisement

Mix down/Bounce

Recording to the master track

Record a "final" stereo mix as a mix down on the MASTER track.
Signals are sent to the master track after passing through the MASTER fader.
Recording to the MASTER track
Prepare by adjusting the signal levels.
1
Press and hold
to return to the beginning.
Then, press
and adjust the levels of each track.
2
Adjust the level of the signal that
passes through the master fader.
Red
Orange
Green
Green
3
Press to stop.
Record to the master track
4
When red, recording
is possible
5
Press and hold
to return to the beginning.
6
7
Press to stop.
NOTE
The settings of the pan, balance, insert and send-
return effects of each track affect the signals sent to
the MASTER track.
and press
to start playback,
Make sure that
the red (0 dB)
indicator does
not light on the
MASTER level
meter.
Press the MASTER
status key 1-2 times
until the indicator
lights red.
and press
Press in order to
start recording.
Play the master track
1
Playback-ready when green
Doing this mutes all other tracks and disables all effects.
2
Press and hold
to return to the beginning.
Press to start playback.
3
Press to stop.
Disable MASTER track playback
4
Unlit means it is
Muting of the other tracks is
disabled
canceled and their status lights
become as they were before.
HINT
• Each project can have one MASTER track.
• A file can be assigned to the MASTER track.
• If you mix down from the middle of a song, it will
always be recorded to a new file.
• During recording, you can check the playback
levels of each track and the recording level of the
MASTER track.
• The signals that have passed through the
MASTER fader are the same as those sent from
the OUTPUT jacks.
• This operation can be undone by pressing the
UNDO soft key.
• You can use the metronome during playback.
Ref: Sequential playback of
projects
Press the MASTER
status key 1-2 times
until the indicator
lights green.
and press
Press the MASTER
status key 1-2 times
until the indicator is
unlit.
P97
46

Advertisement

Table of Contents
loading

Table of Contents