Selecting Projects And Files - Zoom R16 Operation Manual

Project
Selecting projects and files
You can select a project for recording, playback and editing from the top screen.
You can also select files for playback and assign them to tracks.
Select a project
PROJECT>SELECT
1
Press [PROJECT].
2
Select >SELECT
P R O J E C T
> S E L E C T
Press [ENTER].
3
Select the project.
P R O J E C T S E L E C T
N o . 0 0 2 : P R J 0 0 2
Press [ENTER].
4
Load the project.
N o . 0 0 2 : P R J 0 0 2
L o a d ?
Press [ENTER].
NOTE
You can only playback and record to the project
that is currently loaded. You cannot load and use
multiple projects at the same time.
HINT
When the R16 [POWER] switch is turned ON, the
project loaded the last time the unit was used will
be loaded automatically. (If you have changed SD
cards, then the last project used on the inserted
card will be loaded.)
.
Change menu
Change
project
Select a file
PROJECT>FILE
1
Press [PROJECT].
2
Select >FILE
P R O J E C T
> F I L E
Press [ENTER].
3
Select the file.
T R A C K 1 5
M 1 5 T R 0 0 0
Select file.
*If you want to listen to a file for confirmation,
you can use the following keys.
Playback: [PLAY] key
Stop: [STOP] key
Fast forward: [FF] key
Rewind: [REW] key
Zero return:
[STOP] and [REW] keys
Moving to a marker:
Ref.: Track assignment
.
Change menu
Change track
[ T R 1 ]
or use
[1 - 8] and
[MASTER]
status keys
P.23
58