Upgrading The Firmware - Zoom R24 Operation Manual

Upgrading the firmware

Upgrade the firmware as necessary.
1
Copy the rmware upgrade le to the
root directory of an SD card.
2
Insert the SD card with the rmware
upgrade software le into the R24 (if it is
not already in the unit).
3
While pressing and holding
turn the POWER switch ON.
The upgrade screen opens.
4
Select "OK" and press
upgrading.
5
When the screen shows that upgrading
has completed, turn the R24 power OFF
once and then turn it on again.
NOTE
• Download the latest system software at the
ZOOM website (http://www.zoom.co.jp).
• Use the TOOL>SYSTEM>VERSION menu item to
check the version of the system software that the
unit is currently using.
135
,
to start