Table of Contents
Advertisement
Sampler functions
Loop settings
Make loop settings separately for each track.
Turn loops ON and set their starting points and lengths.
Setting tracks to loop
Turn loops ON and OFF for each track.
1
Press
2
Select the track to be looped.
3
Select LOOP.
Press
4
Select ON/OFF, and set it to ON to
enable loop playback.
Select track
Change menu
Change menu
Change
setting
NOTE
• The status key indicator of a track with LOOP set
ON lights orange instead of green when enabled
for playback. Moreover, a track with LOOP set ON
cannot be used to record (the indicator will not
be lit red). In addition, the following functions can
be used when a track has LOOP set ON.
- The pad can be used to trigger the loop.
- Pressing the PLAY key starts loop playback.
- Sequence data can be recorded.
• When a rhythm pattern is assigned to a track, it
cannot be set to loop.
• In step 2, you can also select tracks by pressing
their status keys.
50
Advertisement
Table of Contents
