Using The Insert Effect Only For Monitoring - Zoom R24 Operation Manual

Effects

Using the insert effect only for monitoring

By applying an insert effect only to monitoring, input signals can be recorded unprocessed
to tracks.
1
Press
Press
select an insert effect.
2
Select algorithm/patch.
Using the insert effect only for
monitoring
By default, when an insert effect is ap-
plied to an input signal, the signal with
the effect is recorded to the track.
However, if necessary, you can apply
the insert effect only to monitoring and
record the unprocessed input signals to
the tracks.
For example, you can record vocals
without an effect, but apply an insert
effect to a microphone signal to make
singing easier for a vocalist.
87
Select effect type
beneath to
Change menu
Change setting
3
Select REC SIG and set it.
Input signals are recorded to tracks after
Wet being processed by the insert effect.
(Default value)
Input signals are recorded to tracks before
being processed by the insert effect. The
input signal monitored from the OUTPUT and
Dry
PHONES jacks, however, is processed by the
insert effect first.
HINT
• The settings made here are stored for each
project separately.
• If necessary, reset to Wet before recording other
parts.
Change menu
Change setting