Changing The Sd Card While The Power Is On - Zoom R24 Operation Manual

SD cards

Changing the SD card while the power is on

You can change the SD card while the power is on. Do this if the remaining capacity of the
inserted card is low or if you need to import previously recorded data from the SD card.
1
Press
2
Select SD CARD.
Press
3
Select EXCHANGE.
Press
4
Remove the SD card
5
Insert an SD card
NOTE
• If the inserted SD card is already formatted for
the R24, proceed to Step 6 of "Load data from
the new SD card" or "Save R24 data to the new
SD card".
• If you insert an SD card that has not been
formatted for use with the R24, follow the proce-
dures for formatting an SD card on the next page.
101
Change menu
Change menu
Card replacement
possible
Load data from the new SD card
6
Select LOAD.
Press
Save R24 data to the new SD card
6
Select SAVE.
Press
7
Select SAVE TO and set the project
where you want to save it
8
Select EXECUTE.
Press
NOTE
• Disable write-protection on an SD card before
inserting it.
• SAVE includes various data
but no audio data is saved.
Change menu
Change menu
Change menu
Change setting
for the project in use,