Introduction - Zoom R24 Operation Manual

Introduction

Thank you very much for purchasing the ZOOM R24 Recorder:Interface:Controller:Sampler.
We will call it simply the "R24" in this manual. The R24 has the following features.
■ Multitrack recorder that can use up to 32 GB
SDHC cards
The R24 can record up to 8 tracks simulta-
neously, allowing serious live recording. For
example, you can record a complete band
on individual tracks or a drum kit with multiple
microphones. After making linear PCM record-
ings (WAV format) at 16/24-bit and 44.1/48-kHz
sampling rate, you can transfer recorded files
to your computer to use them in DAW software.
You can even connect two R24s together with
a USB cable, allowing recording of up to 16
tracks.
■ Hi-Speed USB (USB 2.0) audio interface
You can use the R24 and its many input and
output jacks as a Hi-speed USB (USB 2.0)
audio interface. As an interface, the R24 can
handle 8 inputs and 2 outputs at a maximum of
24-bit and 96 kHz. Its effects can even be used
(at 44.1 kHz only). The unit can also operate
using USB bus power.
■ Usable as a control surface for DAW software
The R24 has functions that enable control of
DAW software on a computer via a USB cable.
You can operate its transport, including play,
record and stop keys and physically control
onscreen faders. You can also assign various
DAW functions to the R24's F1–F5 function keys.
(The assignable functions depend on the DAW
software.)
■ Diverse effects
The R24 has two types of built-in effects. Insert
effects can be applied to specific channel
signals and send-return effects can be used
through the mixer send-return bus. You can use
these effects in a wide variety of ways, including
during recording, by applying them to already
recorded tracks, and in the mastering process
of mixing down and bouncing.
■ Comprehensive built-in mixer features
The R24 is equipped with a digital mixer that
allows you to mix the playback of audio tracks.
You can adjust the volume, pan, EQ and effects
for each track and mix them into a stereo signal.
Please read through this manual carefully in order to understand the R24 functions well.
After reading it, please keep the manual along with the warranty in a safe place.
■ Handles a variety of input sources including
guitars, microphones and line-level equipment
The R24 is equipped with 8 input jacks that
accept both XLR and standard phone connec-
tors, including 1 that can handle high imped-
ance and 6 that can supply phantom power
(24 V or 48 V). The R24 can handle all types of
sources, including high impedance guitars and
basses, dynamic and condenser microphones,
and synthesizers and other line level instru-
ments. It also has two built-in high-performance
microphones that are convenient for recording
acoustic guitars and vocals.
■ Exchange files with computers and USB
memory devices
The R24 has a USB 2.0 jack that allows high
speed data transfer. You can transfer WAV
audio files recorded on the R24 to a computer
just by dragging and dropping. You can also
exchange files with a connected USB memory
device without using a computer.
■ 24-voice built-in sampler can be triggered
using 8 pads and 3 bank keys
Use the sampler to assign sounds to each track
(pad) and create loops. Play the pads in real-
time, and even create performance data for a
complete song by combining loops. By simply
lining up drum loops from the included USB
memory, anyone can easily create professional-
quality backing parts and basic tracks. While
listening to loop playback, you can record audio
on other tracks because the R24 recorder and
sampler work together seamlessly.
■ Rhythm and metronome functions can be
used as guides and backing tracks
The unit starts with over 400 rhythm patterns
that use the built-in drum machine, and you
can create your own original patterns using
both real-time and step input. You can output
the metronome sound only to the headphones,
allowing you to send just a click to the drummer
in a live situation, while the signals from the out-
put jacks are sent to a mixer.
Note: For the improvement of this product, its specifications are
subject to change without notice.
2