Eq, Pan And Send Level Track Settings - Zoom R24 Operation Manual

Mixing

EQ, pan and send level track settings

Use the track mixer to set track parameters that, for example, adjust pan (stereo position),
EQ (equalizer) and send-return effects.
1
Press
2
Select a track.
3
Select a menu item and its setting.
4
Select EQ HI, EQ MID or EQ LO.
Press
5
Select each item and change settings.
HINT
• Use the track mixer to adjust each track param-
eter, including pan and the send-return effect
levels, to process the signals.
• In step 2, you can also select a track by pressing
Change tracks
its status key so that its indicator lights orange.
Change menu
NOTE
• Except for phase settings (INVERT), both left and
right channels of stereo tracks share the same
parameter values.
Change
setting
• Settings are stored separately for each project.
• The only setting that the MASTER TRACK has is
volume control using its fader.
Change menu
Change menu
Change setting
40