16-Track Synchronized Recording With Two Units - Zoom R24 Operation Manual

Tools

16-track synchronized recording with two units

If you want to record more then 8 tracks at the same time during a band performance, for
example, you can increase the number of tracks by connecting two R24s units by USB.
Make sender settings
Set the R24 to use for key control as the master.
1
Press
2
Select SYSTEM.
Press
Press
3
Select SYNC REC and set it to Master.
HOST USB indicator lit
4
37
Change menu
Change menu
Master/Slave
Connect the two R24 units by USB cable
Plug a USB 2.0 (AB-type) cable into the
ports that have lit indicators.
Make receiver settings
Set the R24 that will receive commands as the slave.
1
Press
2
Select SYSTEM.
Press
Press
3
Select SYNC REC and set it to Slave.
DEVICE USB indicator lit
HINT
Command keys that affect both units.
REC key
PLAY key
STOP key
Change menu
Change menu
Off/Master/Slave
FF key
REW key