Table of Contents
Advertisement
Connecting and setting the R24
Follow these procedures after the first time
1
Press
2
Select AUDIO I/F.
3
Select whether or not to use the settings
of the previous project.
4
Select EXECUTE.
5
Connect the USB cable to the R24.
USB DEVICE indicator Lit
6
Connect the USB cable to
the computer.
111
Disconnecting
1
2
Change menu
Press
Change menu
3
Change
setting
Change menu
Press
• Before removing the USB cable when discon-
necting from a computer, always follow the proper
procedures for the computer OS to disconnect
the device first.
• Before removing the USB cable, conduct step
2 of "Disconnecting" first.
• The audio interface and control surface func-
tions of the R24 can be used by drawing power
through a USB cable from the USB bus.
• We recommend always using the latest R24
system software. If you use an R24 running an
older system, a computer might not recognize it
properly.
Press
Press the
below
Select YES.
Press
Disconnect the USB cable
NOTE
Select CONTINUE to use the same settings as last time.
• INSERT EFFECT settings
• SEND RETURN EFFECT settings
• Mixer settings
• TUNER settings
Select RESET to restore default settings for each item.
.
Move cursor
Advertisement
Table of Contents
