Step 2: Turning On The Device And Formatting The Sd-Card; Step 3: Checking The Settings - Zoom H4n Instructions Manual

STEP 2: TURNING ON THE DEVICE AND FORMATTING
THE SD-CARD
All the way down on the left side of the device you will find the "On/Off"
switch. Press it for 1-2 seconds until the display lights up.
If this is your first time turning on the recorder, we would advise you to
format the SD-Card in order to delete old recordings made by the people
who used it before you.
On the right side of the device you'll find the "Menu" button. Press this
and use the small wheel above it to scroll through the list until you find the
item "SD-card".
Press the wheel to confirm your selection. This will bring you to the next
menu, where you'll choose the item "format". Press the wheel again to
confirm and once more to answer "Yes" to the Pop-Up asking "Are you
sure?". Now the entire memory of the SD-Card has been wiped.

STEP 3: CHECKING THE SETTINGS

Storage Location: Press the button on the left side under the display mar-
ked "Folder". Select "Folder 1" by
scrolling with the small wheel on the
right side of the device and con-
firm your selection by pressing the
wheel.
Digital Recorders / Seite 5
Attention! By doing this you will
delete all files from the SD-Card!
Only do this after you've checked
whether there's nothing on there
that you still need and haven't
saved yet!