Table of Contents
Advertisement
10. OPTIONS
10.1 General
If applicable, the individual operator manuals will mention
options or special functions (e.g. TR-7A, AS-1A). In general
these options can be installed by the service organization.
Some options can be activated by the operator or
supervisor after installation.
10.2 More options
Inserter IN-3
The inserter IN-3 can be equipped with a second envelope
feed hopper, the EF-3 (see Fig. 38). Depending on the way
it is used, it will double the hopper capacity, reduce settings
and/or allow to feed two different envelope sizes (Mix 'N
Go
). See page 35.
®
32/40
Fig. 38
Transport unit TR-7A
See TR-7A operator manual section 4.6. The TR-7A can be
equipped with the so called "Twin cycle" option. With this
option installed the fold/no fold deflector for station 2(3
and 4) is automatically operated. Knob A (Fig. 39) is not
applicable anymore.
On standard transport units the documents fed by station 2,
3 and 4 must have the same type of format in case folding of
(one of) these documents is required. With the "Twin cycle"
option installed it is possible to feed different document sizes
from station 2, 3 and 4. Small documents that do not require
folding and large documents that require folding can be
processed in one run, provided that the documents that
require folding must have the same format because these
are all folded the same way.
Fig. 39
These are the possibilities with twin cycle:
• all documents from stations 2, 3 and/or 4 have the same
format and are all folded (no twin cycle).
• all documents from stations 2, 3 and/or 4 bypass the
folder (no twin cycle).
• documents from station 2 bypass the folder, documents
from station 3 (and 4) are folded.
• documents from station 2 are folded, documents from
station 3 (and 4) bypass the folder.
• documents from station 2 and 3 bypass the folder,
documents from station 4 are folded.
• documents from station 2 and 3 are folded, documents
from station 4 bypass the folder.
SI-92
Hide quick links:
Advertisement
Table of Contents
