Installing A Hard Disk Drive; Figure 2-4 Inserting A Hard Disk Drive (Sun Fire V210 Server Shown) - Sun Microsystems Fire V240 Administration Manual

Installing A Hard Disk Drive

Caution – The server and hard disk drives contain electronic parts that are
extremely sensitive to static electricity. Wear a grounded antistatic wrist strap when
you carry out this procedure.
FIGURE 2-4
5. Slide the catch on the front of the hard disk to the right.
This releases a handle on the front of the hard disk drive. The lever must be open
before you insert the hard disk drive. If it is not, the hard disk drive will not engage
with the server correctly.
6. Slide the hard disk drive into its bay at the front of the server.
Push it in firmly until the metal lever starts to close. This indicates that the hard disk
drive has engaged with its connector in the server.
7. Push the metal lever until the disk drive clicks into place.
8. Close the bezel.
If you have installed a hard disk drive with Solaris running, now perform the steps
in "Installing a SCSI Hard Disk Drive With Solaris Running" on page 29.
28 Sun Fire V210 and V240 Servers Administration Guide • April 2003
Inserting a Hard Disk Drive (Sun Fire V210 Server Shown)