To Start Openboot Diagnostics; Table 6-4 Sample Obdiag Menu - Sun Microsystems Fire V240 Administration Manual

To Start OpenBoot Diagnostics

1. Type:
ok setenv diag-switch? true
ok setenv auto-boot? false
ok reset-all
2. Type:
ok obdiag
This command displays the OpenBoot Diagnostics menu. See
TABLE 6-4
1 i2c@0,320
4 network@2,1
7 scsi@2,1
10 usb@a
Commands: test test-all except help what setenv versions printenvs
exit
Note – If you have a PCI card installed in the server, then additional tests will
appear on the obdiag menu.
3. Type:
obdiag> test n
Where n represents the number corresponding to the test you want to run.
A summary of the tests is available. At the obdiag> prompt, type:
obdiag> help
60 Sun Fire V210 and V240 Servers Administration Guide • April 2003
Sample obdiag Menu
2 ide@d
5 rtc@0,70
8 serial@0,2e8
11 usb@b
obdiag
3 network@2
6 scsi@2
9 serial@0,3f8
12 flashprom@2,0
.
TABLE 6-4