Installing a Hard Disk Drive
show-obdiag-results Not Supported
Page 76 of the Sun Fire V210 and V240 Servers Administration Guide (816-4826-10) lists
the show-obdiag-results command. This command is not implemented.
Installing a SCSI Hard Disk Drive With Solaris
Running
Page 29 of the Sun Fire V210 and V240 Servers Administration Guide (816-4826-10)
documents the procedure for installing a SCSI hard disk drive while the Solaris
operating environment is running. Steps 3 and 4 are not needed. The following note
applies:
Note – The output text provided is example text only. In the example outputs, the
disk identified is not consistent across examples. However, the format of the output
is correct. The disk name will be consistent in the output you see when you type the
commands.
PCI Cards
The following note refers to page 36 of the Sun Fire V210 and V240 Server Parts
Replacement Manual (817-0743-10).
Note – A 66 MHz PCI card can only perform at 33 MHz when it is attached to
PCI-1 and PCI-2.
11