Voice Mail - Yealink SIP-T46G User Manual

The SIP-T46G IP phone supports MWI when receiving a new voice message. If someone
leaves you a voice mail, you will receive a message waiting indicator. MWI will be
indicated in three ways: a warning tone, an indicator message (including a voice mail
icon) on the LCD screen, and the power indicator LED slow flashes red. This will be
cleared when you retrieve all voice mails or delete them.
The MWI service is unsolicited for some servers, so the SIP-T46G IP phone only handles
the MWI messages sent from the server. But for other servers, the MWI service is
solicited, so the SIP-T46G IP phone must enable subscription for MWI.
Note
MWI service is not available on all servers. Contact your system administrator for more
information.
The MWI subscription parameters you need to know:
Options
Subscribe for MWI
MWI Subscription Period
Subscribe MWI to VM
Note
The phone will send SUBSCRIBE messages for the MWI service to the account or the
voice number MWI service depending on the server. Contact your system administrator
for more information.
To configure subscribe for MWI via web user interface
1. Click on Account.
2. Select the desired account from the pull-down list of Account.
3. Click on Advanced.
4. Select Enabled from the pull-down list of Subscribe for MWI.
Description
Enable or disable a subscription for MWI service.
Period of MWI subscription. The IP phone sends a
refresh SUBSCRIBE request before initial SUBSCRIBE
expiration.
Enable or disable a subscription to the voice mail
number for MWI service.
To use this feature, you should also configure the
voice mail number.
Advanced Phone Features
149