Yealink SIP-T46G User Manual page 101

With the handset on-hook, enter the desired number using the keypad.
-
Press
To place a call using the headset:
Do one of the following:
- With the optional headset connected, press
Press the line key to obtain a dial tone.
Enter the desired number using the keypad.
Press
- With the optional headset connected, press
Enter the desired number using the keypad.
Press
Note
To permanently use the headset mode, refer to
The SIP-T46G IP phone can handle multiple calls at a time. However, only one active call
(the call that has audio associated with it) can be in progress at any given time. The
SIP-T46G IP phone can handle a maximum of 6 calls at one time.
To place multiple calls:
You can have more than one call on your SIP-T46G IP phone. To place a new call during
an active call, do one of the following:
- Press the line key. The active call is placed on hold.
Enter the desired number using the keypad.
Press
Press
-
Press the New Call soft key.
Enter the desired number using the keypad.
Press
You can press
to retrieve the desired call.
Note
If multiple accounts are registered on the phone, you can first press the desired line key
in the idle screen or press the Line soft key in the dialing screen, and then you can use
the selected account to place a call.
, , or the Send soft key.
, , or the Send soft key.
, , or the Send soft key.
, , or the Send soft key.
or the Hold soft key to place the original call on hold.
, , or the Send soft key.
or to switch between calls, and then press the Resume soft key
to activate the headset mode.
to activate the headset mode.
Headset Prior on page 56.
Basic Call Features
89