Yealink SIP-T46G User Manual page 37

3. Click Confirm to accept the change.
Text displayed on the web user interface will change to the selected language.
The time and date are displayed on the LCD screen when the phone is idle. You can
configure the phone to obtain the time and date from the SNTP server automatically, or
configure the time and date manually. If the phone cannot obtain the time and date
from the Simple Network Time Protocol (SNTP) server, contact your system administrator
for more information.
To configure the SNTP settings via phone user interface:
1. Press Menu->Basic->Time & Date->General->SNTP Setting.
2. Press
area from the Time Zone field.
The default time zone is "+8 China(Beijing)".
3. Enter the domain names or IP addresses in the NTP Server 1 and NTP Server 2 fields
respectively.
4. Press
Daylight Saving field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Note
Please refer to
phone.
To configure the time and date manually via phone user interface:
1. Press Menu->Basic->Time & Date->General->Manual Setting.
or , or the Switch soft key to select the time zone that applies to your
or , or the Switch soft key to select the desired value from the
Appendix A - Time Zones for the list of available time zones on the IP
Customizing Your Phone
25