Yealink SIP-T46G User Manual page 30

User Guide for the SIP-T46G IP Phone
3. Enter the user name and password in the corresponding fields.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
Note
Wrong network settings may result in inaccessibility of your phone and may also have an
impact on your network performance. For more information on these parameters,
contact your system administrator.
Generally, your phone will be deployed with multiple other phones. In this case, your
system administrator will configure the phone parameters beforehand, so that after you
start up your phone, the phone will be registered and ready for use. The SIP-T46G IP
phone supports up to 16 accounts. If your phone is not registered, you may have to
register it. For more information on how to register your phone, refer to
Management
If the phone has successfully started up, the idle LCD screen will be displayed as below.
18
on page 75.
Account