Yealink SIP-T46G User Manual page 120

User Guide for the SIP-T46G IP Phone
2) Press the All Lines soft key.
The LCD screen prompts "Copy to all lines?".
3) Press the OK soft key to accept the change or the Cancel soft key to cancel.
c.) If you select No Answer Forward, you can enable it for a specific account.
1) Press
Answer Forward field.
2) Enter the destination number you want to forward unanswered incoming
calls to in the Forward to field.
3) Press
before forwarding from the After Ring Time field.
The default ring time is 12 seconds.
4) (Optional.) Enter the no answer forward on code or off code respectively in
the On Code or Off Code field.
You can also enable no answer forward for all accounts. After no answer
forward was enabled for a specific account, do the following:
1) Press
108
or , or the Switch soft key to select Enabled from the No
or , or the Switch soft key to select the ring time to wait
or to highlight the No Answer Forward field.