Yealink SIP-T46G User Manual page 40

User Guide for the SIP-T46G IP Phone
2. Press
or select Disabled to disable this feature.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
Key as send is configurable via web user interface at the path Features->General
Information.
You can lock your phone temporarily when you are not using it. This feature helps to
protect your phone from unauthorized use.
Phone lock consists of the following:
Menu Key:
Function Keys:
All Keys:
Note
The emergency number setting, if desired, must be made before lock activation. For
more information, refer to
To activate the phone lock via phone user interface:
1. Press Menu->Advanced (default password: admin) ->Phone Settings->Phone
Lock.
2. Press
28
or , or the Switch soft key to select # or * from the Key as Send field,
The Menu soft key is locked. You cannot access the menu of the
phone until unlocked.
The function keys are locked. You cannot use the MESSAGE,
REDIAL, HOLD, MUTE, TRANSFER, OK, X, navigation keys, soft
keys and line keys until unlocked.
All keys are locked except the Volume key. You are only
allowed to dial emergency numbers, reject incoming calls by
pressing the X key, answer incoming calls by lifting the handset,
pressing the Speakerphone key, the HEADSET key or the OK
key, mute an active call by pressing the X key, place an active
call on hold by pressing the Hold soft key, resume the held call
by pressing the Resume soft key, and end the call by hanging
up the handset or pressing the Speakerphone key.
Emergency Number
or , or the Switch soft key to select Enabled from the Lock Enable
on page 83.