Yealink SIP-T46G User Manual page 150

User Guide for the SIP-T46G IP Phone
6. Enter the group name in the Label field.
7. Press the Save soft key to accept the change.
8. Repeat the step 2-7, you can add more paging groups.
Paging list is configurable via web user interface at the path: Directory->Multicast IP.
To delete paging group via phone user interface:
1. Press the Paging list key when the phone is idle.
2. Press
3. Press the Option soft key.
4. Press the Delete soft key.
5. Press the OK soft key to accept the change or the Cancel soft key to cancel.
If you want to delete all paging group, you can press the Delete All soft key.
You can also configure the phone to use a default codec for sending multicast RTP
stream via web user interface.
To configure a default codec for multicast paging via web user interface:
1. Click on Features->General Information.
2. Select the desired codec from the pull-down list of Multicast Codec.
138
or to select a desired group.