Yealink SIP-T46G User Manual page 68

User Guide for the SIP-T46G IP Phone
place a call using the headset automatically. For more information on using the
headset to place a call, refer to
To deactivate the headset mode:
1. Press
The HEADSET key LED goes out when the headset mode is deactivated.
You can use headset in priority when headset prior feature is enabled. This feature is
especially useful for permanent or full-time headset users.
To enable headset prior via web user interface:
1. Click on Features->General Information.
2. Select Enabled from the pull-down list of Headset Prior.
3. Click Confirm to accept the change.
To use headset prior, you should activate the headset mode in advance:
1. Physically connect the headset.
2. Press
Note
If headset prior is enabled, the headset mode will not be deactivated until you press the
HEADSET key again.
If headset prior is disabled, the headset mode can be deactivated by pressing the
speakerphone key or the HEADSET key.
Headset prior is configurable via web user interface only.
56
Placing Calls
again on the phone.
to activate the headset mode.
on page 87.