Yealink SIP-T46G User Manual page 122

User Guide for the SIP-T46G IP Phone
3. Press
key.
4. Press
forward.
5. Press the Save soft key to accept the change.
Dynamic Forwarding
To forward an incoming call to another party:
1. When the phone is ringing, press the Forward soft key.
2. Enter the number you want to forward the incoming call to.
3. Press
The LCD screen prompts a call forward message.
When the phone forwards a call, the forward call prompt window will pop up by default,
Note
if you want to disable the feature, contact your system administrator for more
information.
You can transfer a call to another party in one of three ways:
Blind Transfer: Transfer a call directly to another party without consulting.

Semi-Attended Transfer: Transfer a call when the target phone is ringing.

Attended Transfer: Transfer a call with prior consulting.

To perform a blind transfer:
1. Press
110
or to select the desired forwarding type, then press the Enter soft
or , or the Switch soft key to select Disabled to disable the call
, , or the Send soft key.
or the Transfer soft key during a call.