Usb Device Mode - Panasonic AJ-PG50 Operating Instructions Manual

USB Device Mode

A USB 2.0 connection with a computer or other device allows
you to use the P2 cards inserted in the P2 card slots of this unit
as mass storage devices. Note that a separate USB driver,
which can be downloaded free of charge from the Panasonic
website, needs be installed on the computer.(➝ "Website
URL" page 9)
You can use P2 Viewer Plus, which can be downloaded free
of charge from the Panasonic website, to manipulate clips
stored on P2 cards.
For the URL(➝ "Website URL" page 9)
Note:
For details on connecting, refer to the operating instructions sup-
plied with your computer and software.
1
Press the [MODE] button when the unit is in the idle
state.
2
Align the cursor ( ) with "USB DEVICE" in the selec-
tion screen and press the [SET] button.
"USB DEVICE" flashes on the LCD monitor and the unit
switches modes. After the mode is switched, "USB DE-
VICE DISCONNECT" appears on the LCD monitor.
This message is replaced with the "USB DEVICE CON-
NECT" message when the connection with the computer
is completed.
3
Perform operations in USB device mode.
Note:
Please refer to the operating instructions supplied with your
computer and software.
4
Press the [MODE] button to return to regular mode.
Note:
Recording, playback, and most other operations are not avail-
able in USB device mode.
75
USB Device Mode: