Panasonic AJ-PG50 Operating Instructions Manual page 107

VERSION
SYSTEM > VERSION
Displays the various versions of the unit.
Item
VERSION Displays the overall firmware version (representative version) of the unit.
MODEL NAME Displays the model name of the unit.
SERIAL NO. Displays the serial number of the unit.
MAC ADDRESS Displays the MAC (Media Access Control) address of the unit.
UID Displays the unique ID of the unit.
OPTION MENU
SYSTEM > OPTION MENU
The option menu can be displayed by pressing the [MENU] button while pressing the [DISPLAY] button.
Item
Selects the area of use for the unit. The following settings can be set in the "AREA SELECT" screen.
NTSC: Selects an NTSC area other than Japan.
AREA SETTING
NTSC (J): Selects Japan.
PAL: Selects a PAL area.
Sets whether to use the function that switches the signal reference for the LCD display and output signals from the input
signals to the internal free signals.
Use this if there is a discrepancy in the input signal frequency and reception is not possible on the unit.
ON: Enables free signal reference mode.
OFF: Enables standard mode.
INT LOCK MODE
Note:
• Dropped frames, repeating frames, image overlap, and similar problems may occur in the LCD display and output
signals.
• This setting returns to its default value ("OFF") when the unit is turned off. Recording is not possible when this is set
to "ON."
Settings and brief function description
Settings and brief function description
_ is the factory default setting.
107
Setup Menu: Menu List