Panasonic AJ-PG50 Operating Instructions Manual page 64

INFRA Mode
These settings are for connecting with a wireless access point.
1
Select "WLAN" in the "I/F SETUP" - "NETWORK" - "NETWORK SEL" (➝ page 98) menu setting.
When you change these settings, restart the unit if necessary.
2
Select "INFRA" in the "I/F SETUP" - "NETWORK" - "WIRELESS PROPERTY" - "TYPE" (➝ page 98) menu set-
ting.
3
Configure each item in the "I/F SETUP" - "NETWORK" - "NETWORK SEL" (➝ page 98) menu setting as neces-
sary.
Set "SSID," "ENCRYPTION," and "ENCRYPT KEY" in accordance with the wireless access point to which the unit will con-
nect.
MAC ADDRESS: MAC address of the wireless LAN (This cannot be changed.)
SSID INPUT TYPE: Select "MANUAL" to set this manually and select "SELECT" to select from the connection destination list.
SSID: Network name (SSID) of wireless access point (Factory default setting: AJ-PG50)
CHANNEL: Channel to use (Factory default setting: AUTO) (This cannot be set.)
ENCRYPTION: Encryption method to use (Factory default setting: WPA2-AES)
ENCRYPT KEY: Encryption key of wireless access point (Factory default setting; 01234567890123456789abcdef)
DHCP: Set whether to use automatic assignment by DHCP (ENABLE: Use automatic assignment / DISABLE: Do not use
automatic assignment) (Factory default setting: ENABLE)
IP ADDRESS: IP address of unit (Factory default setting: 192.168.0.1)
SUBNET MASK: Subnet mask (Factory default setting: 255.255.255.0)
DEFAULT GATEWAY: Default gateway (Factory default setting: 192.168.0.254)
PRIMARY DNS: Primary DNS server setting (Factory default: 0.0.0.0) (If DHCP is set to "ENABLE" and assignment from the
DNS server is possible, the value will be overwritten by the externally assigned DNS server value. The value is unset when
it is "0.0.0.0.")
SECONDARY DNS: Alternate DNS server setting (Factory default: 0.0.0.0) (If "DHCP" is set to "ENABLE" and assignment
from the DNS server is possible, the value will be overwritten by the externally assigned DNS server value. The value is unset
when it is "0.0.0.0.")
DHCP SERVER: Set whether to use the DHCP SERVER function (ENABLE: Use the "DHCP" SERVER function / DISABLE:
Do not use the DHCP SERVER function) (Factory default setting: ENABLE) (This cannot be set.)
4
Enter the SSID and password (encryption key) of the connection destination wireless point (only when configur-
ing the settings manually).
Set the SSID of the connection destination wireless access point to the SSID of this unit.
• Factory default setting: AJ-PG50
Set the password of the connection destination wireless access point to the password set in "ENCRYPT KEY" of this unit.
• Factory default setting: 01234567890123456789abcdef
5
Check the network connection.
When the settings are complete, check whether the network connection between this unit and the wireless access point is
correct.
If the network connection is correctly established, the network status icon at the top right of the thumbnail screen turns yellow
and you can use the applications for using the network (P2 Browser (➝ page 67) and FTP Client functions (➝ page 69)).
64
Main Mode: Using the Unit Connected to a Network