Repeat Playback - Panasonic AJ-PG50 Operating Instructions Manual

Clip and text memo forward/rewind
1
Switch to playback or a still image or other image dis-
play state.
Overview of all clip playback transitions
This unit allows you to vary audio and video playback speed. The figure below shows speed and transition changes.
Data in boxes: Status and speed
Arrows: Possible direction of transition
Arrow text: Cursor button operation
• Asterisks (*) in the diagram indicate stepwise changes in speed.
Example: Pressing the right cursor button during [PLAY]
double speed playback (SHTL + 2.0) and each press of the button
increases the speed gradually towards the SHTL MAX setting.
–SHTL MAX setting
Right
Rewind by frame

Repeat playback

Play back playable clips repeatedly.
1
Press [MENU] to display the menu.
(➝ "Menu Operations" page 83)
2
Set the "REPEAT PLAY" (➝ page 90) menu item to
"ON."
3
Close the menu.
36
Main Mode: Recording/Playback Screen
Left
SHTL – *
Right Left Right
SHTL + 0.0
Down
PREV
Rewind by clip
2
Press the [PREV] button or [NEXT] button.
The clip beginning or text memo position is located in accor-
dance with the "SEEK POS SEL" (➝ page 91) menu item.
results in
Right
Right
SHTL + 1.0
Right Left
SHTL + 0.67
Right Left
SHTL + 0.*
Left
Forward by frame
Up
NEXT
Forward by clip
4
Press the [PLAY]
All clips are played repeatedly.
• Repeat playback continues until the [STOP]
is pressed.
• Repeat playback is not performed during playback other
than normal playback, for example, variable playback,
and playback stops at the beginning (BOS) or end (EOS)
of a playable clip.
• During repeat playback, "REPEAT PLAY" is displayed for
the operating status on the OSD.
+SHTL MAX setting
Right Left
SHTL + *
Left
SHTL + 2.0
Right
Left
PLAY
Left
button to start playback.
button