Preparing For Connection - Panasonic AJ-PG50 Operating Instructions Manual

Java Runtime
Java Runtime is used to display the status on a computer. Java is required to display this panel.
• For the latest information on the versions for which operation has been verified, see the website. (➝ " Website URL " page 9)

Preparing for Connection

For wireless LAN
Connect the AJ-WM30 wireless module (sold separately) to the [USB 3.0 HOST] port on the unit.
Notes regarding use of wireless module
Carefully read and sufficiently understand the operating instructions of the wireless manual before use.
There are the following restrictions to prevent incorrect operation.
• Supported specification: IEEE802.11g/n
IEEE802.11a and IEEE802.11b cannot be used.
• Communication frequencies: 2412 MHz to 2462 MHz (1ch, 6ch,11ch)
12ch or higher cannot be used.
Use abroad
In order to comply with the laws and regulations regarding radio waves in various regions of the world, the following four models
of this product are provided. Each model can be used only in a compatible country or region.
• AJ-WM30MC
People's Republic of China
• AJ-WM30P
United States of America, Canada, Mexico, Argentina, Peru, Taiwan
• AJ-WM30E
EU member nations, EFTA member nations, Australia, New Zealand, Russia, Ukraine, Saudi Arabia, UAE, Kuwait, Oman,
Egypt, Republic of South Africa, South Korea, Philippines, Malaysia, Singapore
• AJ-WM30
Japan
Note:
In France, outdoor use is prohibited.
For wired LAN
Connect the cable.
1
Connect the LAN cable to the [LAN] port at the rear.
62
Main Mode: Using the Unit Connected to a Network
LAN cable (sold separately)