Panasonic AJ-PG50 Operating Instructions Manual page 74

Writing back from an FTP server
(import)
A folder selected from an FTP server on the network can
be written back to an SD memory card.
1
Display the FTP EXPLORE screen.
2
The folder screen of the FTP server appears.
The folders on the set server are displayed. Use the cursor
buttons to select the transfer source folder.
3
Press the [MENU] button to display the menu.
(➝ "Menu Operations" page 83)
4
Use the cursor buttons to align the cursor with the
"IMPORT" (➝ page 87) menu item and press the
[SET] button.
Press "OK" in the SD IMPORT confirmation dialog box that
appears to start writing back the data to the SD memory
card.
Note:
• To stop importing, press the [SET] button, align the cursor
with "YES" in the "CANCEL" confirmation message, and
press the [SET] button. Partially imported files in the SD
memory card are deleted, but successfully imported files re-
main.
• After importing starts, disconnection errors will no longer be
detected.
Use the above procedure to stop an import operation that
has stalled.
• Writing back may take a long time depending on factors
such as the number of files, file sizes, and network condi-
tions.
• Any files with the same path names on the SD memory card
will be overwritten without any warning message being dis-
played. However, if the path names are the same but the
types differ (folder and file), an error is generated.
• To prevent inadvertent overwriting, format the SD memory
card before importing whenever possible.
• To use SSH, the FTP server must be SSH compliant.
• Setting SSH to "ENABLE" will reduce the transfer speed.
When importing is completed, "COPY COMPLETED!" ap-
pears.
74
Main Mode: Using the Unit Connected to a Network