Using The Battery; Installation; Removal - Panasonic AJ-PG50 Operating Instructions Manual

• If the [CHARGE] lamp continues flashing even though the battery is at a normal temperature, the battery or battery charger may have
malfunctioned. Contact your dealer.
• When the battery is hot, the charging time will be longer than usual.
• If the battery charger is used near a radio, the sound of the radio may become distorted. Place the battery charger at least 1 meter
away from a radio.
• The battery charger may emit noise during use but please note that this is not a sign of a malfunction.
• Level indicator function
A battery LED indicator allows you to check an estimate of the battery level.
The level indicator may differ when the battery is being used in the unit and when it is separate from the unit.
• The supplied battery is designed specifically for the unit.
Do not use it with other equipment.

Installation

1
Slide the battery until it clicks into place.

Removal

lamp
1
1
Press the [ ] button for two seconds to turn the
power off, and confirm that the
off.
2
Remove the battery while pressing the battery latch
release button.
Support the battery with a hand to prevent it from falling.
22
Preparation: Using the Battery

Using the Battery

lamp has turned
Note:
If the power is on, be sure to turn it off before removing the
battery.
Battery latch
release button