Menu List; Clip - Panasonic AJ-PG50 Operating Instructions Manual

CLIP

The CLIP menu is enabled in thumbnail screen mode. (It is disabled in recording/playback screen mode.)
PROPERTY
CLIP > PROPERTY
Item
Displays detailed clip information on the screen. Individual items can also be edited. For de-
CLIP PROPERTY
tails, refer to "Viewing and Editing the Clip Information" (➝ page 46).
Displays the card status of the P2 card slots. For details, refer to "Checking the Card Status"
CARD STATUS
(➝ page 50).
Sets the CPS encryption password for microP2 memory cards.
LOAD: Loads the CPS password from an SD memory card.
CPS PASSWORD
SET: Enter a CPS password.
DELETE: Deletes the password stored on the unit and disables the encryption format.
Displays SD memory card information.
SD CARD
"SD CARD PROPERTY" (➝ page 103)
Sets whether to display the remaining free space or used space when displaying P2 card
information.
REMAIN SETUP
REMAIN: Remaining free space indication
USED: Used space indication
Displays the free space on a partition.
FREE CAP. OF
Note:
PARTITION
This is displayed only when storage explorer.
CLIP > PROPERTY
Item
Selects the clips to display in the thumbnail screen.
ALL CLIP:
Displays thumbnails for all clips.
SAME FORMAT CLIP:
Displays thumbnails only for clips recorded in the same format as the system format and with
the same audio bit rate as that set in the "AUDIO SMPL RES" (➝ page 106) menu item.
SELECTED CLIPS:
REPOSITION Displays thumbnails only for clips selected using the [SET] button. The thumbnails are dis-
played in the order of selection.
MARKED CLIPS:
Displays thumbnails only for clips with shot marks added.
TEXT MEMO CLIPS:
Displays thumbnails only for clips with text memo data.
SLOT CLIPS:
Displays only clips in selected slots as thumbnails.
Deletes the selected clips.
Note:
DELETE
To stop deletion, press the [SET] or [CANCEL] button to cancel the operation. Partially de-
leted clips cannot be restored even if you cancel deletion.
86
Setup Menu: Menu List

Menu List

Settings and brief function description
Settings and brief function description
_ is the factory default setting.
FREQ indications
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
_ is the factory default setting.
FREQ indications
59.94Hz 50Hz
59.94Hz 50Hz