Maxicode Set Length 2 - Datalogic PowerScan PD9530 Product Reference Manual

Enter/Exit Programming Mode

Maxicode Set Length 2

This feature specifies one of the bar code lengths for
trol. Length 2 is the maximum label length if in Variable Length Mode, or the
second fixed length if in Fixed Length Mode. Characters can be set from
0001 to 0145 characters in increments of 0001 (pad with zeroes).
See page 284
$CMXL2
Select Maxicode Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
188
for detailed instructions on setting this feature.
Length 2 is 0145 Characters
DEFAULT
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
Appendix D, Keypad
meric characters in
senting your desired character(s). End by scanning
the ENTER/EXIT bar code again.
~
CANCEL
PowerScan™ PD9530/PBT9500/PM9500
2D Global Features
Maxicode Length Con-
repre-